1x8 White Pine T&G
1x8 Eastern White Pine is our most commonly sold board, it has a v joint on one side and is square on the other. White Pine is preferred as it is lightweight, easy to work with and strong and durable for its low density.
8x8 White Cedar
8x8 Eastern White Cedar is a great choice for both indoor and outdoor projects. White Cedar is preferred for outdoor uses for its decay and rot resistance, and high strength to weight ratio. White Cedar's aromatic properties make it smell clean crisp and airy.
Sycamore Slab
This Sycamore Slab would make a great dining room table. This slab has been air dried for 3 years and kiln dried. It is 3 inches thick and is almost 4 feet wide! This specific slab is on sale at $1000
1x6 Western Red Cedar T&G
1x6 Western Red Cedar is a perfect board to use in a sauna or areas where insects and moisture may be a concern as it has natural inspect, rot and decay resistance. Saluda Lumber generally has 3 grades of 1x6 cedar available, cabin, #2 and select. One side of the board is smooth and the other side is rough. Both sides are v-joints.
1x6 Southern Yellow Pine T&G
1x6 SYP is a great choice for walls or ceilings that might have lots of wear and tare as its around 40 percent denser than White Pine. The boards pictured are clear select grade. One side of this board is v-joint and the other side is bead (pictured).
1x12 White Pine Nickel Gap Shiplap
1x12 EWP Nickel Gap Shiplap is smooth on one side and rough on the other side, both sides have a small gap between the boards to provide an aesthetically pleasing definition between boards.
Assorted Stone
Saluda Lumber carries a variety of stones, most are used for decorative walls, patios and walkways but can also be used for retaining walls, fireplace chimneys and even landscaping bridges.
1x10 White Pine T&G
1x10 EWP Center match T&G has one side smooth and one side rough, both sides have a square joint which makes your wall or ceiling look seamless.
1x6 "Nightfall" Nickel Gap T&G
1x6 Nightfall is a prefinished Nickel gap T&G product that provides a unique finish that leaves a glimpse of natural wood grain behind the stain.
6x6 Western Red Cedar
Western Red Cedar is a perfect species to use in areas where insects and moisture may be a concern as it has natural inspect, rot and decay resistance.
1x8 Primed Nickel Gap T&G
1x8 Primed Nickel Gap is 5/8" thick. One side is nickel gap and the other side is V joint. With these boards being primed already it can save substantial time on install.
Eastern Aromatic Cedar S4S
EAC square 4 sides is a great choice for trim in a sauna and making specialty projects where having a woody and warm smell is preferred. EAC also has natural pest repelling properties.
1x8 Spruce S4S
This 1x8 Spruce is a great board to overlay for siding and ripping into 1x4 for trim, Spruce shrinks more when kiln dried and ends up cupping much more commonly than White Pine.
Himalayan Cedar Slab
This Himalayan Cedar Slab would make a great dining room table. This slab has been air dried for 3 years and kiln dried. It is 3 inches thick and is almost 4 feet wide! This specific slab is on sale at $1000
1x6 White Pine
1x6 White Pine is one of our most commonly sold boards, it features a v groove on one side and is square on the other side. Occasionally we also stock v groove on one side and a bead on the other side.
2x6 Western Red Cedar
#2 grade, mixed lengths available. Great for sauna benches.